 Most
people find out too late about the high-priced replacement cost of
automotive lenses. Impacted at highway speeds, glass lenses quickly
break, knocking the light out immediately or in minor cases it cracks
allowing condensation inside which deteriorates the lighting performance,
looks unsightly, and eventually destroys the bulb. Plastic lenses
also crack and are prone to "sandblasting" from road debris and particles
in the wind which causes the dull and hazy appearance so often seen
on plastic headlights, turn signals and foglamps. HeadLamp Saver ™
solves all of these problems clearly. The secret is its flexibility
to absorb and cushion impact.
For RV's, Trucks, Cars, Trailers
and Motorcycles.
FAQ's 
- Offers Maximum
Lens Protection
- Easy to Apply
- Similar to installing a bumper sticker
- Maintenance
Free - Cleans just like glass
- Dissipates
heat effectively, extremely pliable and contours to nearly any
surface
- Optically
Clear - Invisible protection, will not distort light or alter
the appearance of the vehicle
- UV Treated
- Will not harden or yellow
- Can be removed
without leaving adhesive residue
- Designed
to last 8 years - Most people own a vehicle 4 years or less
- Fits any
light
- 4 Year Factory
Warranty
- Thousands
of other uses - Protects almost any smooth surface
 Bulk
Rolls for use with computerized plotter or manual pre-cutting
Our HeadLamp Saver™ Bulk Rolls can be pre-trimmed to any shape
desired (before) appplication with scissors and trimmed (after)
application with knife or blade. For added versatility HeadLamp
Saver™ can be used with a computerized plotter to pre-cut into
shapes for specific vehicle Headlight configurations. |
 |
 |
 |
20 mil.
Thick
For Plastic Lenses only,
Turn Signals, Fog lights,
6", 12", 18", 24" Wide Rolls |
30 mil.
Thick (High Protection)
For All Glass and Plastic Lenses.
Abrasion Protection for Surfaces,
12", 18", 24" Wide Rolls |
40 mil.
Thick (Maximum Protection)
For All Glass and Plastic Lenses.
Abrasion Protection for Surfaces,
12", 24" Wide Rolls |
HL-SERIES FILMS> HL-40, HL-30, HL-20
HEADLAMP SAVER (Lens Protection)
Highest quality marine grade film. Available in 40 mil., 30 mil.,
and 20 mil. thicknesses. Polished gloss and glass-like clarity. Flexible,
duable, conforming. Impact absorbing and abrasion resistant. Cleans
easily like glass. UV protected. Will not overheat lens. Fits all
lights and smooth surfaces. Will not alter vehicle appearance. Will
not yellow, harden or distort light. 4 year factory warranty.
Some
Features
|
|
- Standard
Widths to fit most applications.
- Custom
Widths Available.
- Transparent
acrylic adhesive - excellent adhesion to most surfaces.
Excellent cold and high temperature performance.
|
- Coated
release paper liner.
- Temperature
range -40°f to 220°+f.
- Waterproof
in fresh and salt water.
|
Recommended
Usage: Glass and Plastic Lights, Glass, Security Lights,
Painted Surfaces, and Special Applications.
For the protection of headlights, foglamps and surfaces where gloss,
optical clarity and U.V. protection are desired. Excellent for gravel
and stone impact breakage and extreme abrasion prevention. Protects
security lights against air rifle (BB, Pellet gun) vandalism.
Properties:
|
|
- Non-yellowing
UV outdoor use.
- Excellent
gloss and optical clarity.
- High
Durability.
- Abrasion
resistant.
- Chemically
resistant.
|
- Cleans
easily just like glass.
- Waterproof.
- Removable.
- Easy
to apply.
- Available
in rolls.
|
You can Protect
Your Prized Investment from many damages caused by rocks, sand, ice,
and other hazards that cause chipping, scratching or abrasion, as
well as protect from pitting caused by bug guts, road tar, and salt.
Can also protect many parts from routine wear and tear such as vinyl
kick panels and consoles.
- Frontends,
Rocker Panels, Fenderwells & Ground Effects.
- Glass, Headlamps,
Foglights, Mirrors & Coachwork.
- Custom &
Show Cars
 |
|
 |
Hood & Body Saver 10 mil thick transparent Surlyn ®
Protective
Tape for paint protection
 |
|
